Texture Coatings

APCO Texture Coatings are a range of high build flexible texture profiles for maximum substrate hiding power. It is an ultra- premium highly durable and flexible water borne elastomeric membrane coating formulated with new generation acrylic resins. Apco Texture provides a durable crack bridging coating that moves with the substrate without rupturing. A tough weather – proof coating that provides optimum life cycle efficiency to a variety of surfaces. Ideal for protection over cement render, masonry, CFC, rendered AAC, pre-cast concrete, tilt up concrete, pre-formed polymer formwork brick, masonry block work, interior masonry and plasterboard surfaces for a decorative finish. Apco Texture Coatings when applied with a texture roller gives a high build profile finish.

  • A minimum of 30 days curing is required for proper curing of alkaline masonry/cement substrates.
  • Stir the contents thoroughly before and during use.
  • Apply one coat of APCO Texture Primer Sealer Undercoat and allow to dry for minimum 4 hours.
  • Then apply one coat of Textured Coating, allow to dry, followed by one coat of APCO WeatherBlock Exterior Acrylic. Note: Additional coats maybe required depending on texture profile requirements and finishing colour.

Colour Stylist Service

Requesting a Omega Paints is simple and easy.

First Name (required)

Last Name (required)

Email (required)

Phone

Street Address

Suburb

Subject

State

Subject

captcha

×